Biomechanical comparison of stemless humeral components in total shoulder arthroplasty

BackgroundThe purpose of this study was to compare initial fixation strength between various stemless and stemmed humeral components and to correlate implant fixation strength with bone mineral density (BMD).MethodsFive humeral stem designs were investigated: Stemless-A (four hollow fins), Stemless-B (central body, three solid fins), Stemless-C (central screw, peripheral rim-fit), Short stem (50 mm), and Standard stem (130 mm). Fifty cadaveric human humerii were obtained and divided into five groups. BMD within the humeral head was determined for all samples. The mean BMD was similar between groups. The 25 samples with the lowest and highest BMDs were categorized as “Low” and “High,” respectively, with a BMD threshold of 0.35 g/cm², creating BMD subgroups. After implantation, each sample underwent a standardized biomechanical testing protocol, with axial loading followed by torsional loading. Sensors attached to the specimen recorded micromotion throughout testing. Axial loading consisted of cyclic loading for 100 cycles at 3 peak forces (220, 520, and 820 N). Torsional loading consisted of 100 cycles of internal/external rotation at 0.1 Hz at 6 peak torques, or until failure (±2.5, 5, 7.5, 10, 12.5, and 15 Nm). Failure was defined as the torque at which any bone fracture, implant detachment from anchor/stem, or an excess of 50° internal/external rotation occurred. Groups and BMD subgroups were compared.ResultsAt maximal axial loading, Stemless-B demonstrated greater micromotion (540 μm) than Stemless-C (192 μm) (P = .003). Stemless-B and Stemless-A (387 μm) also had greater micromotion than Short stem (118 μm, P < .001, P = .03) and Standard stem (85 μm, P < .001, P = .01). When comparing low-BMD samples at maximal axial loading, these differences were accentuated, but comparison of high-BMD samples showed no significant differences between groups. Torsional testing demonstrated that Standard stem failed at greater torque (7.2 Nm) than Stemless-B (2.3 Nm, P < .001), Stemless-A (1.9 Nm, P < .001), and Stemless-C (3.9 Nm, P = .01). When comparing torsional testing results of low-BMD samples, both Standard stem and Short stem failed at greater torque than Stemless-B (P = .02, P = .003) and Stemless-A (P = .03, P = .004) but failed at a similar torque to Stemless-C. Torsional testing of high-BMD samples showed that Standard stem failed at a greater torque than all stemless designs.ConclusionStemless humeral implants should be used with caution in low-BMD settings (<0.35 g/cm²). A central screw and peripheral rim-fit stemless anchor design demonstrated greater fixation strength at low BMD when compared with other designs, while all stemless designs performed similarly at high BMD.Level of evidenceBasic Science Study; Cadaveric Study     

Two-year results after combined phacoemulsification and iris-fixated phakic intraocular lens removal

Graefe's Archive for Clinical and Experimental Ophthalmology - To describe and present results after a technique for cataract surgery combined with explantation of an iris-fixated phakic...     

A Coupled FEM-BEM Approach for the Solution of the Free-Boundary Axi-Symmetric Plasma Equilibrium Problem

In this paper we present a coupled Finite Element Method – Boundary Element Method (FEM-BEM) approach for the solution of the free-boundary axi-symmetric plasma equilibrium problem. The proposed method, obtained from an improvement of the Hagenow-Lackner coupling method, allows to efficiently model the equilibrium problem in unbounded domains by discretizing only the plasma region; the external conductors can be modelled either as 2D or 3D models, according to the problem of interest. The paper explores different iterative methods for the solution of the nonlinear Grad-Shafranov equation, such as Picard, Newton-Raphson and Newton-Krylov, in order to provide a robust and reliable tool, able to handle large-scale problems (e.g. high resolution equilibria). This method has been implemented in the FRIDA code (FRee-boundary Integro-Differential Axisimmetric – https://github. om/matteobonotto/ FRIDA), together with a suitable Adaptive Integration Technique (AIT) for the computation of the source term. FRIDA has been successfully tested and validated against experimental data from RFX-mod device, and numerical equilibria of an ITER-like device.     

外周血单个核细胞内人类免疫缺陷病毒DNA和RNA定量对病毒转录活性的区分

目的基于人类免疫缺陷病毒Ⅰ型(HIV-1)感染者外周血单个核细胞(PBMCs)中HIV-1总DNA和RNA定量检测结果对感染细胞内病毒的转录活性进行区分。方法采集2017年10月至2018年12月于哈尔滨医科大学附属第四医院感染科就诊的HIV-1感染者血液样本,分离PBMCs细胞,采用PCR荧光探针法对PBMCs细胞内HIV-1总DNA和RNA进行定量检测,并计算两者比值(Ratio)。根据Ratio值筛选出HIV-1转录活跃组样本和相对非活跃组样本,另外选择健康人PBMCs样本作为对照组。对3组样本进行基因转录组表达谱检测以及人口特征差异性检验,并对基因表达谱检测结果进行主成分分析以验证对3组样本病毒转录活性区分的准确性。结果从60例感染HIV-1患者的PBMCs样本中筛选出HIV-1转录活跃组样本(10例)和相对非活跃组样本(11例),另外选择6例健康人PBMCs样本作为对照组。其中转录活跃组样本Ratio值为165.2~738.93,平均为(339.27±189.68);相对非活跃组Ratio值为4.67~42.39,平均为(17.65±11.78)。转录活跃组和相对非活跃组样本间的CD4+T细胞计数(P=0.049)和Ratio值(P<0.001)差异均具有统计学意义;3组样本年龄(P=0.989)和性别(P=0.650)分布差异无统计学意义。对3组样本的PBMCs基因表达谱主成分分析结果显示:对照组与HIV-1感染者(包括转录活跃组和相对非活跃组)间区分明显。转录活跃组和相对非活跃组间有部分样本重合,同时结果也显示当HIV-1感染者的CD4+T淋巴细胞计数与健康人无显著差异时,其细胞内的基因表达与健康人接近。结论基于HIV-1总DNA和RNA定量检测结果及两者间比值可以较好地区分PBMCs内病毒转录活性。HIV-1感染细胞内部病毒的不同转录激活状况可导致其基因表达谱的异质性。     

基于正交试验的肾造瘘管固定方案研究

目的 探讨基于正交试验的肾造瘘管不同固定方案的比较效果。方法 将14Fr硅胶肾造瘘管固定在聚乙烯展板和拉力显示器上，以固定材料、固定方法、面积为3个影响因素，每个因素3个水平，每组进行3次试验再求平均值作为最后拉力值F，共进行9个固定方案共27次试验。利用L9（33）正交试验矩阵研究不同材料（医用橡皮膏、医用透气胶带、医用无纺布胶带）、固定方法（交叉固定法、“工”字固定法和改良“工”字固定法）及面积(16 cm2、24 cm2、32 cm2）对肾造瘘管固定强度的影响。结果 正交试验所选的3种影响因素中，对拉力值影响显著性排序为：材料＞方法＞面积；3种固定材料中，医用橡皮膏固定强度最大。结论 肾造瘘管固定方案中，最佳固定组合为以医用橡皮膏结合改良“工”字法固定，可为临床管道固定方案的选择提供参考。     

Introduction: Novel Frontiers in Cancer Metastasis

Clinical & Experimental Metastasis -     

Effect of the Lipid Fraction of Microalgae on Biochemical Parameters in Female C57BL/6 Mice

Bulletin of Experimental Biology and Medicine - We studied the effect of microalgae of various systematic groups added to the ration on the biochemical parameters of blood serum and liver and...     

Treatment of multiple adjacent RT 1 gingival recessions with the modified coronally advanced tunnel (MCAT) technique and a collagen matrix or palatal connective tissue graft: 9-year results of a split-mouth randomized clinical trial

Clinical Oral Investigations - To evaluate t he long-term outcomes following treatment of RT 1 multiple adjacent gingival recessions (MAGR) using the modified coronally advanced tunnel (MCAT) with...     

China special issue on gastrointestinal tumors-Radiological features of pathological complete response in mismatch repair deficient colorectal cancer after neoadjuvant PD-1 blockade: A post hoc analysis of the PICC phase II trial

Neoadjuvant programmed cell death protein 1 (PD-1) blockade exhibits promising efficacy in patients with mismatch repair deficient (dMMR) colorectal cancer (CRC). However, discrepancies between radiological and histological findings have been reported in the PICC phase II trial (NCT 03926338). Therefore, we strived to discern radiological features associated with pathological complete response (pCR) based on computed tomography (CT) images. Data were obtained from the PICC trial that included 36 tumors from 34 locally advanced dMMR CRC patients, who received neoadjuvant PD-1 blockade for 3 months. Among the 36 tumors, 28 (77.8%) tumors achieved pCR. There were no statistically significant differences in tumor longitudinal diameter, the percentage change in tumor longitudinal diameter from baseline, primary tumor sidedness, clinical stage, extramural venous invasion status, intratumoral calcification, peritumoral fat infiltration, intestinal fistula and tumor necrosis between the pCR and non-pCR tumors. Otherwise, tumors with pCR had smaller posttreatment tumor maximum thickness (median: 10 mm vs 13 mm, P = .004) and higher percentage decrease in tumor maximum thickness from baseline (52.9% vs 21.6%, P = .005) compared to non-pCR tumors. Additionally, a higher proportion of the absence of vascular sign (P = .003, odds ratio [OR] = 25.870 [95% CI, 1.357-493.110]), nodular sign (P < .001, OR = 189.000 [95% CI, 10.464-3413.803]) and extramural enhancement sign (P = .003, OR = 21.667 [2.848-164.830]) was observed in tumors with pCR. In conclusion, these CT-defined radiological features may have the potential to serve as valuable tools for clinicians in identifying patients who have achieved pCR after neoadjuvant PD-1 blockade, particularly in individuals who are willing to adopt a watch-and-wait strategy.